DIY Plasma TV Troubleshooting Steps That You Need To Do Before You Fix The Problem
Due to the advancements in technology, there are a lot of electronic products that have emerged in the market and one of them is the plasma TV. A plasma TV is a flat panel display that uses plasma cells to generate images as opposed to the LCD TVs that use LEDS to generate the images. Because the plasma TV is fairly new technology, only a handful of qualified technicians can repair it but this does not mean that you are no longer qualified to troubleshoot problems of your plasma TV. In fact, troubleshooting your own plasma TV is easy as long as you know the steps to do it thus here are the important DIY plasma TV troubleshooting steps that you need to do before fixing the problem of your TV.
Check The Physical Aspect Of Your Plasma TV
If your plasma TV does not turn on for some unknown reasons, don’t panic just yet. There must be some wires that are loose thus check the connection first and see if they are okay. Also, you need to check on the power supply if it is working properly or if it is not loose. Chances are that you may have a few losses wires in your system.
Reset The Plasma TV
If everything is okay, then you can unplug the plasma TV for about an hour to reset it. If it still does not work, then you need to check the circuit board that which supplies the power to the screen. However, before you do this, check your warranty first. If it is still under warranty, then do not open the circuit board without the presence of the service technician that will help you troubleshoot. If not, then you can open the screen to check the circuit board to see what the problem is. Look for a cold solder joint or a loose capacitor and using a soldering iron, solder the parts again until you get the TV working once more. This is a good solution to a plasma TV showing only the images in half screen. If the problem cannot be fixed, then you need to contact a technician to be able to find out what is wrong with your plasma TV.
While you are doing these two steps, it is important that you always consult with the manual of the plasma TV so that you will be able to put back the pieces together once more.
